Howdy!
I have a keeb.io cepstrum split board that I’d like to travel with when I head into the office. Anybody have good experiences with a carrying case they could recommend? My cepstrum is 8 inches / 20.5 cm by 4.5 inches / 11 cm for reference.
Howdy!
I have a keeb.io cepstrum split board that I’d like to travel with when I head into the office. Anybody have good experiences with a carrying case they could recommend? My cepstrum is 8 inches / 20.5 cm by 4.5 inches / 11 cm for reference.
I 3d-printed a hard box for my Fourier. https://gitlab.com/jaredjennings/fourier-box. (wince, there is no photo nor even an STL in that repository.) I wanted it to fit in my backpack with a laptop and books, so it holds the two halves side by side, not stacked. I had to print it in two pieces and friction-weld them together. That sounds fancy, but it just means you take a piece of filament, put it in a Dremel chuck, and draw on your model. Wherever you push down, the friction makes the end of the filament melt. Then I put on some Sci-Grip 4 (dichloromethane), which further solvent-welded the joint.
If you wanted to make one like this for your cepstrum, you’d need to do it in more pieces because that’s larger than a Fourier. Your case would end up to be the size of a laptop. You might not want that.