The Moondrop MIAD 01 is one of the most distinctive Android devices of 2024 thus far. It has a 4.4mm headphone jack to go with the more conventional 3.5mm type. Furthermore, it seems it might be as appealing to teardown enthusiasts as well as audiophiles, and may, therefore, also be easier to repair than most modern smartphones.
      • 𝕸𝖔𝖘𝖘@infosec.pubEnglish
        3·
        8 months ago

        Hahaha!! I wish! Actually, I have old equipment that only takes the 6.35mm TS (and a couple TRS) connectors, and I don’t like adaptors, as they almost always noticeably reduce audio quality.

        • WaterWaiver@aussie.zoneEnglish
          2·
          8 months ago

          I don’t like adaptors, as they almost always noticeably reduce audio quality.

          Huh? 3.5mm to 6.35mm adapters, the small bits of metal and plastic, or are you talking about something else?

          • 𝕸𝖔𝖘𝖘@infosec.pubEnglish
            1·
            8 months ago

            Yeah. Maybe I just bought the super cheap ones? Not sure. I ended up getting a 3.5 to 6.35 cable, and haven’t had a problem since.

            • WaterWaiver@aussie.zoneEnglish
              2·
              8 months ago

              That’s really weird o.o The adapters should just be metal and plastic, same as the cables.

              Maybe they have a really weak connection internally, ie high resistance? This might lead to both lower volume in the headphones and (in some circumstances) higher noise, especially if it’s an unstable resistor.

              I recommend starting a shelf of cursed items :)

                • WaterWaiver@aussie.zoneEnglish
                  2·
                  8 months ago

                  This could end up competitive.

                  Invite people to your house, give them a tour and briefly mention the shelf before scurrying them on. Watch their faces contort but don’t give them the opportunity to ask any questions.

                  EDIT: I have a vague guess at what could have gone wrong with your adaptor. It might have had OK L and R contacts but a broken G contact. You would then hear the difference between the L and R channels, which most often sounds like garbage. Music would be weird (entire instruments/vocals disappear) and mono audio would be silent or near-silent (so you’ll have to turn it up a lot and will hear noise).

                  • 𝕸𝖔𝖘𝖘@infosec.pubEnglish
                    2·
                    8 months ago

                    Hahaha!! Like a random red door on the back wall of the basement. “That’s just ‘the door’. Nothing to worry about, as long as you keep your distance” and quickly walk them off with no further explanation. Hahahahaha

                    That makes sense. I used to get the adapters from a local shop where I used to live, and they were cheap cheap. Converted to USD, they were probably around $0.10 a piece. He gave them out free when you purchased headphone. After a while I got tired of the static and low sound quality, so I just got a cable (3.5-6.35) on ebay, and it’s been fine since.

                • WaterWaiver@aussie.zoneEnglish
                  2·
                  8 months ago

                  Oh. Back to resistance: Doesn’t really matter audio quality doesn’t care it’s still the same AC signal just with less amplitude

                  Only for ideal resistors.

                  Resistors are noise sources. Intentional resistors tend not to be too bad (and probably won’t be heard in this situation unless you have super-high-impedance headphones, perhaps 10’s of K), but unintentional resistors (eg corroded unstable metal contacts inside a plastic part) can be atrocious.

                  A few things to add to this:

                  (1) If your resistor acts even slightly like a diode then you will encounter partially rectified RF signals (more noise yay). Metal oxides between metals can do this, eg if the connector has crimped two badly-plated bits of metal together.

                  (2) Plasticisers in some plastics can leak out, causing corrosion on unseen internal metal parts.

                  (Of course linking all of this together is just conjecture, the causes of Moss’ bad adaptors might be something completely different)