Hi everyone, Last month I finally managed to build my first SFF PC (Ryzen 7600 + AMD 6800). I’m also starting to learn about self-hosting and tinkering with it (the usual stuff: Jellyfin, pi-hole, nextcloud, VPN, torrenting etc.)
Thing is, of course, a server has to be always on, and I’m having trouble understanding if it can be reasonable to keep it always on or if it’s too pricey and I should invest in a dedicated hardware.
My consideration: a Raspberry Pi seems like it’s not enough powerfull after all. I’ve seen you can come up with an old i5 (4th to 6th gen) minipc with like 100/150 euros, but in not really sure it’s gonna consume much less than my system. What do you suggest? What am I missing?
Thank you :)
Pi should not be the first choice unless you just wanna dip your toe in the water with limited investment or you are real experienced in the trade. While the hardware is powerful enough for many use cases, it is very limited in external connectivity which really hampers its potential as a NAS/multi-purpose server.
CPUs often get less efficient (in the sense of work done per watt) when they are pushed to their limits. Unless you are running the server at full load all the time, the power consumption of a typical x86 system is quite manageable (~30-50W) at idle to low usage. Newer hardware is surely more efficient as newer designs are relatively faster and often have more power conservation technologies built-in.
Nothing will beat single board computer like rpi in power consuption, but PC can be efficient as well. For example in my country I pay around 1€ for each Watt a year (average 0.12€/kwh). So rpi is probably 5€ a year and my new server is like 20-30. There are some servers that run at 10W on idle.
Its 5x difference, but I got much better server and still acceptable cost. Having sata potrs will already save you a lot of $ and time since you need additional hardware to use ssd/hdd on rpi, especially if you need more than 1. And then rpi is not that small anymore. Rpi cant transcode at all, but its good enough for direct play. If you get intel cpu with quicksync you should be golden. I didnt test on 4k, but my g3930 can handle 4x 1080p easy.
I used rpi4 with 4gb ram as media/torrent server for few years and it was simple set and foeget setup untill SSD upgrade when it started started acting up. Figured the rpi cant provide enough juice on USB ports and then I got external power HDD case and got more into self hosting. 4GB soon became a bottleneck so I ended up with new PC and I love it. Still using rpi for 2nd pihole and few more services.
Yeah, I think an old minipc with a intel cpu with quicksync could be fine enough. I may be able to get for free an old notebook with an i3 8gb of ram. Maybe I can reuse that and save some money.
Its best if you can get one for free. Integrated UPS is also nice :) even old is probably overkill, im running all services you mentioned +20 more and cpu is chilling most of the time. Good luck
a
I started with a Pi 4 8GB. It was not able to keep my RAID 1 (constantly loosing one of the two drives, degraded when added back). Transcoding of movies, also Jellyfin, just not possible. So I bit the bullet and took some old hardware (i7-4790K, 1070, 16GB RAM, PSU, CPU-Cooler) and bought some more used (SFF case, mini-itx board, Bluray-Drive). The case wasn’t the cheapest (56€), because I wanted one with enough room for 5.25" drive and 4 3.5" HDDs. Finding a mini itx board for such an old platform was hard and cost 120€ (I didn’t sell the ATX board I originally used with the CPU, yet). But now it’s a great system, running 19 containers atm In other words, don’t underestimate the cost of old hardware. You may find a cheaper, used prebuilt somewhere
I wouldn’t buy any older than 7th gen Intel, you can find micro/usff boxes on ebay with an i5-7500T or similar for under $80 usually. One example is the Lenovo M710q Tiny. Power usage on those should sit around 10W idle, and they have solid quicksync support for media transcoding.
Overall just better than a Pi in every way, other than a little more power usage, and lack of GPIO for those kinds of projects.
Unfortunately, in my country prices are WAY higher for that kind of device, but I too think it’s the right way!
This is really up to you, if you have the budget/space for dedicated hardware then you will benefit from it. However, if you are on a budget/space constraints then you could setup some containers in docker either running on the system or in a VM then transfer them over in the future.
