- cross-posted to:
- technology@lemmy.world
- technology@beehaw.org
- cross-posted to:
- technology@lemmy.world
- technology@beehaw.org
TROY, Mich.—Despite US dominance in so many different areas of technology, we’re sadly somewhat of a backwater when it comes to car headlamps. It’s been this way for many decades, a result of restrictive federal vehicle regulations that get updated rarely. The latest lights to try to work their way through red tape and onto the road are active-matrix LED lamps, which can shape their beams to avoid blinding oncoming drivers.
From the 1960s, Federal Motor Vehicle Safety Standards allowed for only sealed high- and low-beam headlamps, and as a result, automakers like Mercedes-Benz would sell cars with less capable lighting in North America than it offered to European customers.
A decade ago, this was still the case. In 2014, Audi tried unsuccessfully to bring its new laser high-beam technology to US roads. Developed in the racing crucible that is the 24 Hours of Le Mans, the laser lights illuminate much farther down the road than the high beams of the time, but in this case, the lighting tech had to satisfy both the National Highway Traffic Safety Administration and the Food and Drug Administration, which has regulatory oversight for any laser products.
The good news is that by 2019, laser high beams were finally an available option on US roads, albeit once the power got turned down to reduce their range.
…
You must log in or register to comment.
Working for the FDA sounds like it could be pretty lame until you learn about Laser Division.
I think part of the problem, at least for me, is the horrible color temp most headlights use now. They are like 6500k hard white light instead of something less harsh like around 3500k that is much easier on the eyes. I think the only criteria they care about when selecting LEDs is maximum brightness so this is what we get.
This problem desperately needs to be fixed, but the solution isn’t some expensive, over-engineered laser LED matrix. The solution is basic headlights that don’t blind people. You know, like every headlight that existed in the US until a few years ago.
Surely it’s not an insurmountable task to use a cheap LED bulb with the optics to give the beam proper directivity—i.e. not direct the beam into the eyes off oncoming drivers. Maybe even make it replaceable with a screwdriver. Call me crazy.
I drive a Ram 2500… so I have like the worst LED lights for other people. What I don’t get is why they don’t automatically dim as I slow down. It’s now like your headlights are needed to see as far down the road when I’m doing 0mph. Just keep them at the minimum and increase brightness as I drive, and if it detects another car in front of me just reduce light output while drive to -10% from normal.
I don’t think a screwdriver would illuminate much at all. You are a bit crazy.
Because this is the internet, I can’t tell if the whoosh goes to your downvoters or you. I think you were joking, but that second sentence makes me wonder…
Friend of mine has a Merc that detects oncoming traffic and auto-adjusts the high beams to not illuminate other cars and it works really well. But there is always a short delay, so for half a second oncoming drivers get to enjoy the power of the sun.
But the headlights are soo bright, doesn’t matter if it avoids the cars ahead of you when its brighter than the sun and on the front of the largest pickup truck ever invented. Also I’ve never had much luck with auto high beams I doubt the matrix LED would be able to work well enough to actually avoid blinding people, making the current bad headlight situation even worse
