The consensus here seems to always be leave in SDR and use match content, but I’ve had no issues with leaving Dolby Vision on all the time. SDR content like youtube and TV shows that were never mastered in HDR look 100% fine to me. Part of the Dolby Vision spec is that it forces your TV into it’s most color accurate settings so why wouldn’t I want that as well? Using an LG C2 by the way.
I would especially not leave the ATV set to DV or HDR if using an OLED TV. Forcing a higher peak brightness on content made not to go that bright and on screen savers which are supposed to help preserve your display will ultimately shorten the life of your display. OLED elements degrade with use and they degrade even faster with running them brighter. If you care about longevity of your OLED set then save the DV and HDR brightness for content that is meant to be seen that way.
I think it’s a waste of energy and it’s not great to have your tv on 100% brightness for long periods of time especially when it’s not needed
This is just straight up about colorspace I think. Playing SDR content while forcing the TV into HDR forces the SDR colorsspace which is rec 709 or rec 2020 into HDR which is rec 2020 as well. SDR content for Rec 709 would be forced to artificially spread into rec 2020 but this might be solved by some TVs detecting this? Not sure if they do tho because of the forced HDR.
I leave it always neabled. I don’t think there’s any problems? I watch quite a bit of SDR in that mode and I don’t see anything wrong
Part of the Dolby Vision spec is that it forces your TV into it’s most color accurate settings so why wouldn’t I want that as well?
Oh my LG C1 OLED, most Dolby Vision content looked fine. But for AppleTV+ content in particular, something was up with either the appleTV or the TV itself that caused the brightness to constantly shift form shot to shot with Dolby Vision content only. Ted Lasso was the worst offender since it’s a generally very bright show. Within a single scene, the brightness would often shift between the correct level and too-dim from shot to shot. It because so annoying I just disabled Dolby Vision content across the board.
I noticed this problem with Ted Lasso, too. I’ve seen it happen when two characters are talking where one is in front of a bright background and the other is in front of a dark background.
I also noticed this problem with Frasier 2023 on Paramount+, but I couldn’t determine any reason. It is streamed in 4K DV.
Match content is a pain on my TV and AVR combo. It always delays for a very long pause which is so annoying. It looks fine and works better on HDR.
It does use more power and may lead to burn in depending on the content you’re watching. Personally I think it looks bad but if you like it it’s your TV do what you want
i leave dolby vision on all the time and haven’t noticed any issues with sdr content. my lg c2 handles it well, and the color accuracy is a plus for me. plus, i don’t really notice a difference in sdr vs hdr wrapper for the content i watch.
I am in the TV industry and both my sound system and LD OLED are calibrated. I watch everything except OTA with my ATV and I am very satisfied leaving Dolby Vision on all the time.
For the LG owners, which Dolby Vision picture mode do you use? Does this setting make a difference with the other setting combinations?
My CX is set to “Cinema Home”. My ATV has DV on and (the unpopular) Match Content off.
Cinema is the best but too dark for anything but pitch black room viewing in my experience. I prefer Cinema Home with the Dolby Precision Detail setting on which further boosts shadow detail and is intended for “bright room” viewing.
I use Cinema Home for the same reason. Unfortunately, my (old) CX doesn’t have Dolby Precision Detail. I believe LG introduced it with the C2. Fortunately, my apt faces east, so the room isn’t too bright except for a few morning hours. And I use Philips hue lights to control the lighting to enhance the viewing experience like a cinema scene that dims the lights to 15% and changes the color to red.
The consensus
There is no consensus because it depends ENTIRELY on the TV.
On my LG C1 I leave DV on all the time with match content/framerate of course, and the menus and UI look stunning.
On my shittier Vizio LCD TV, I leave it on 4K SDR because DV looks washed out and terrible. But with match content/framerate for content, of course.
There is no single answer. It depends on the TV, and its easy enough to test.
Haha. Every range of opinions on the subject. It looks great on my LG OLED. It does give black screen briefly switching to commercials in some streaming shows.
I almost find that a feature. I’ve missed so many commercials on YouTube. Cause the screen was still black matching content and frames.
Per what some others have said: I think it really depends on your TV. On our bedroom TV (TCL 5 series) leaving it on makes everything look off. On our living room TV (Hisense U8K) leaving Dolby Vision on looks great (quality looks far better than SDR actually).
If you care about accuracy you should probably leave it to match content. You’ll probably have your TV calibrated to show SDR content at 100nits peak, which is a lot dimmer than most people think SDR should look.
If you want it to look bright or maybe even “pretty” you’re probably already watching SDR with a peak of like 300nits, so who really cares then anyways?
If I were to give you a tip: Give accuracy a try. Have tour TV calibrated or at least get close to more accurate setting by copying the settings of a respected calibrator and watch SDR as intended: In in dark room with a faint extra light source at most on a TV calibrated for a peak brightness of 100nits. Let your eyes and brain adjust for a few hours and chances are you’ll love it.
This is for critical viewing. Watching the news in a bright room? Who gives a fuck? Just watch it however you like. It’s like hoe critical listening to music is a completely different thing than having some music on the background while doing chores. The second doesn’t need to be accurate, but the first one really benefits from proper equipment, proper source and correct room accoustics
I have an LG CX set to Cinema mode. I set my ATV to 4K Dolby Vision DV and Match Content “Off”. My experience with SDR content is like your experience — the picture looks great. YouTube videos and old sitcoms on Pluto and Plex look as expected
I tried the recommended settings in the past and the picture wasn’t as good.
Why the heck would you turn match content off is this scenario?
You better sit down. I don’t match frame rate either.
I’ve tried the generally recommended settings and the video experience is less than optimal with my LG CX OLED TV in Cinema mode. My settings normalize the variations where some content is over saturated, some crush brightness, some are harsh, some still have the soap opera effect, etc. I get a consistent and beautiful picture across all of my streaming apps.
Matching ON assumes every content producer puts a lot of thought and money into ensuring their videos look a certain way. Well, they don’t. Or can’t. I would guess many don’t have the budget, equipment, or time to produce superior video. So I let my ATV and LG CX improve then.
The films from film makers who want their films to be seen a certain way (eg Christopher Nolan) are often in 4K DV anyway.