So, this looks like the start of a relatively new community (at least for me), and we surely have some new people coming over from the coffee subreddit, so let’s get some conversation going!
What’s your current favorite brew method? I’ve been really getting into my flat bottom brew lately, with the Stagg XF. I just feel it’s been a bit more forgiving than my v60, and it’s been pulling out some pretty solid tasting notes in my latest beans.
What’re y’all brewing with?
EDIT: I absolutely love the traction this post got! And I love seeing all the methods everyone is using daily. Thank you all
Nothing too fancy. Kettle and a french press.
This is the way
My daily method. Cheap, easy and good coffee.
I recently started using my French press for cold brew and lovvve it. The cheap Amazon cold brewer I have gets so much sediment since I don’t grind my own beans, but the french press is perfect. Downside is the one I have only brews half a gallon so I’m saving/looking for a bigger one
I like to think I know a little about coffee, but this thread shows that I don’t really know anything. My brew method? I have a shitty little $50 espresso maker I got as a birthday gift a while ago, and use that to make the best damn lattes I’ve ever had.
use that to make the best damn lattes I’ve ever had.
Hey man, that’s all that matters
I’ve got a stupidly expensive espresso machine and several stupidly expansive grinders. I used my machine every day for about 5 years. But lately I’ve been pouring water from my kettle into a plastic cone like my dad did in the 80s. Haha. Full circle. I’ve upped my bean quality though.
Hey, pour over is just a good old classic. You can’t really repeat the ritual or flavors you get with it anywhere else. And sometimes the most simple is the most enjoyable.
French press, but using our boy James Hoffman’s method. If I do it how I initially learned, I find my coffee turns out too acidic and dusty. With his method it’s amazingly good.
Though if I need to make a large amount of coffee, filter coffee.
I was so surprised how much more I enjoyed his method over my previous attempts. Don’t get me wrong, I still think most French press attempts turn out pretty good and are much harder to screw up than a v60. But after switching to Hoffmann’s method it has been consistently solid
Cold or hot, V60 is my jam.
Majority pourover (Mugen most often, V60 sometimes, and I just got an Orea that I’ve used a couple of times so far), espresso if I’m feeling up to it (Uniterra Nomad), usually as a small milk drink or sometimes an aerocano, occasionally straight espresso. If I want a milk drink and don’t feel like actually dealing with espresso workflow, aramse sofi south indian filter.
French press. Pre-heat with boiling water before adding freshly ground coffee. Slowly pour water at 95 degrees over the coffee. Stir with wooden spoon, insert lid and let stand 5-10 minutes. Slowly press plunger to bottom. Serve and enjoy.
I know pour over is seemingly the norm at the moment but I’m still chugging along with my 10 years old Bodum stainless steel french press. Tastes fine to me and keeps the coffee hot decently long. Though I’ve been pondering to do the additional step of pouring it through a Hario filter and see if it refines the taste any further.
Just pouring into another pre-heated vessel to stop the brewing process is the move!
Might use this as an excuse to buy a second french press, thank you!
Yeah that or a thermos or a nice serving vessel is the move! just keep hot water in that while you brew your frenchpress and after you plunge, you can slowly pour it over into the pre-heated vessel! Then you won’t have a bad cup on the last one due to continuous brewing
At home, it’s a cheap pour over setup. In the summer I’ll sometimes do a Japanese iced coffee pour over if it’s hot. (Just adjust the ratio and start with ice in the pot.)
At work it’s a flair 58.
Camping it’s a moka pot.
I’ve been looking at the flair 58 as a potential entry into espresso. I have a JX Pro, which I have read should be serviceable to grind for espresso.
How have the shots been on your 58? Only complaints I’ve heard are in relation to preheating, anything else that you love/dislike?
I use a flair signature and love it. The 58, IIRC, heats the brew head for you. It takes some trial and error, but I love using my flair. I’ve noticed different beans require different quantities and grinds to get the right flavor. I can take two bags of different beans, use the same grind setting, same amount of grounds, and have one shot pull in 15 seconds, while the other pulls in a minute. You won’t see this with the auto espresso machines so you won’t get the quality.
It is a bit more work, but having control over the entire process means that once you get good, you will make really good espresso with it.
I’ve done it enough where I can eyeball bean amounts, don’t have to time the pulls, and can tell the water temp by how much is in the pot I use and how long it has been off boil, so it only takes me 5ish minutes from grind to pull. When I first started, it would take me 15 or so minutes.
As far as lattes and such, you will need to get a steamer, frother, whatever for that, but I have learned to love cortado since it is just microwaving some milk.
See my other comment about preheating.
Majority of the time the Aeropress gets used, but I have a French Press I will break out a couple time a month.
French press is just so consistently awesome. It really only makes a bad cup when the beans themselves aren’t all that great.
My wife loves the aeropress for her iced lattes. I just use the aeropress with the prismo attachment.
My go to is my trusty v60. I used to scale and weigh everything before grinding. Now I just eyeball everything.
200g coffee on a cheese cloth bag, 1600g water, mix and chill for 24 hours. Optionally stir half way through. Serve over ice.
I love my Flair Pro. I like being able to dial in my pressure profile (basically extraction flow) by hand depending on the beans or just my mood. Other wise I’m a stainless moka pot guy.
Another flair user. The flair is great because unlike an automatic, you can see how the grind or bean amount affects the extraction time. Different beans often require different grinds and amounts for a good shot. You won’t get this with an automatic.
Is it easy to control the water temperature? As I heard, Flair Pro must be pre-heated to prevent temperature drops.
Yes, but it isn’t a huge deal. I just have a small pot I put the brew head in while the water heats up to a boil. When the water hits a full boil, I turn off the stove, place the brew head and mug, and then pull the shot, the little bit of time the brew head and water are removed from the heat and poured gets it close enough for me to the right temp.
EDIT: Everyone that is thinking about flair, make sure to get one with a pressure gauge. It would be impossible to know if you are using the right pressure be feel on something you have never used before.
Totally agree. My wife talked me into the pressure gauge and I have no idea how anyone can pull a great shot without it. And most of the fun is experimenting with different pressure profiles. And it’s pretty easy to preheat as @neanderthal said. I put my brew head on top of my open kettle so the steam heats it while the water starts to boil. The brew head itself is very thick and retains heat well. I saw a video that shows you do get a drop in temp over a pull which is usually 30-60 seconds for me. But also I’m at high altitude so while I have a different set of temperature issues to deal with I don’t know that I’m experiencing as dramatic a drop off.
I’m no coffee snob. Gas station dark roast, little cream no sugar. Under a dollar in a hurry.
Hey man, sometimes you just need that bittrr punch of caffeine. Ain’t nothing wrong with that.
Aeropress daily. Using James Hoffman’s method, more or less. Occasionally I need to get the French press out.
I’ve been toying with the idea of getting an espresso machine. However, everyone I know who has one has gone back - sooner or later - to their previous method of brewing. And the espresso machine ends up being for special occasions. I’m not sure it’s worth it at that point.
I might get a prismo for the aeropress to see if that will satisfy my “What’s next?” craving…
I was real nervous about the step from Aeropress to espresso, but I knew that I liked good espresso from cafes nearby so I eventually took the plunge.
I got a basic Breville grinder/espresso machine, which makes decent coffee, not great, but good enough, but I really prefer espresso to other coffee drinks, and my wife loves it when I make her a latte, so overall it’s been a huge upgrade.
If you prefer espresso or latte style coffees, or you just enjoy trying new sorts of coffee things and tinkering with grind size, then an espresso machine will be great, otherwise you are wise to stick with the style of brewing you know you enjoy.
