I have a couple of old laptops lying around and want to throw them away, but have been cautious to do so because of privacy concerns of data still on the hard drives. What is the best way to wipe them? Or should I take them out and physically destroy them?

They are running windows vista and 10 I think.

  • CADmonkey@lemmy.world
    link
    fedilink
    arrow-up
    33
    ·
    11 months ago

    I like to take the hard drive(s) out and either drill holes in them or beat them to pieces with a big hammer.

    Dear old Dad worked in IT, and he had a clearly marked “hard drive eraser”. It was a 20 pound sledgehammer.

    • const_void@lemmy.ml
      link
      fedilink
      arrow-up
      2
      ·
      11 months ago

      Doesn’t that still leave most of the data on it? You don’t even bother erasing the drive first?

      • Fosheze@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        arrow-down
        1
        ·
        11 months ago

        It takes far more work to recover data off of smashed platters than Joe the average users data is worth. There’s very few ways to make that data completely nonrecoverable. Even zeroing the drive isn’t 100% safe from someone with the right resources and knowhow. Just smashing the platters makes data recovery enough of a pain that it’s almost never worth it.

        • dgmib@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          11 months ago

          Data on a HDD that’s been overwritten with zeros or random data is unrecoverable with all known current technology.

          In theory it might be possible to recover something with some future tech that hasn’t been invented yet, which is why the DOD standard requires erasing with multiple passes, but there isn’t currently a (publicly known) way of doing it.

          SSDs are a bit tricky because of wear levelling, but usually two full overwrites of a SSD makes it just as unrecoverable.

      • CADmonkey@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        11 months ago

        I don’t see how much data can be recovered from broken, bent pieces. If you’re really concerned, you can use a torch to raise a magnetic platter until it glows, this raises it above it’s curie temperature so all the magnetic particles stop being magnetic.