I’m planning on building a PC soon and, while I have done plenty of research, I’d like to hear advice from people who have experience in the area personally. It’s also just nice talking to other people in general, lol
You must log in or register to comment.
Buy more than you need, is the lesson I’ve learnt. Especially power, I have an 850 as well, but I sort of wish I bought a 1000W, the way things are going.
5950x with 7900xtx runs fine on my 850 watt.
For sure, I win a 5800x3d and a 4070ti on an 850, but I had to replace the 650 that I built with in 2020 to do that. Two power supplies in three years could have been averted if I had just bought a bit more than I needed the first time. It sucks having to completely rewire an already built computer too.
On the other hand, I bought a beefy power supply in my last rig based on advice that I’ll want room for upgrades, but I never did. It’s not really of interest to me to fuff around with upgrades.
As a patient gamer, by the time my rig isn’t able to handle modern games, it’s time for a completely new build.
Also, I care a lot about noise (and thus heat), so I’d rather keep my entire build’s thermal profile low, using lower-power components.
My new build, I only included enough extra power for some extra HDDs (including extra overhead for power spikes).
https://pcpartpicker.com/ or https://pcpartpicker.ca if you’re Canadian is very helpful for drafting up a build or shopping for parts, specially if you’re a newbie. You can even find recommended builds on there.
Don’t skimp on the power supply brand. Buy a reputable one. Buy one with headroom if you plan on upgrading your GPU at a later time.
Watch some build videos from tech YouTubers and watch the steps they go through.
For gaming start with the GPU and build around it. Pick a CPU with a reasonable price that will not bottleneck it. YouTube reviews are your friend here. Watch a few with your CPU and GPU pairing and get an idea of the average and one percent low marks.
For your first PC, stick to air cooling. Pick a reputable brand.
I personally like gamersnexus reviews for all the parts you can. They are very methodical with benchmarks. Ask questions here as you will have many.
There’s not too places you can damage things when installing, but I think the most understated one is the USB 3.0 header that you connect from the case to the motherboard. The plug is super tight and very difficult to remove once you put it in, so I recommend only plugging it in once you’re ready to start using your machine. I know too many stories of people breaking it and not being able to plug in USB devices to the front of their PC case because of this.
If you plan on doing anything with linux fuck nvidia. It’s such a PITA. Biggest regret of my build.
Trust me, I know (I tried running Linux on my current NVDIA PC… Never again). While I plan on running Windows (mainly due to how much support it has for like. Everything) I do plan on running Linux on a laptop in the future and possibly dual booting
I love dual booting. If I need to quickly check mails or search the web linux launches in an instant. If I need to game I dont care about longer boot time anyhow.
Yeah, that’s why I wanna dual boot myself, except there’s some software I need on Windows that isn’t available on Linux along with games. Also, what distro(s) do you use? I’ve already picked out a few candidates for what I’ll use, but it’s nice hearing firsthand experiences
I’ve been using Debian because it’s easy to use basically. But it’s no good for tinkering. It takes ages for packages to get moved into the stable channel and testing is exactly that and causes headaches. But if you want a stable and easy to use OS Debian is great. Set it up once and you’re set for a long time.
But I like to tinker so there is a clutter of packages I’ve installed but don’t use and I’ve lost track of them and the configs. It runs but needs cleaning up (again).
Which is why I’m going to switch to Guix. I’m hoping to replicate the same basic set up on my laptop and desktop with only minor differences. Guix allows the declaration of the entire system and if you use the same file it will always be set up exactly the same way. Plus the fact that I can roll back the entire system to a previous state sounds really appealing for someone who likes to break stuff. That said the declaration files and anything to do with Guix itself uses Lisp and as a lisp noob I’m expecting a lot of headaches and tabbing to the manual. Also package installation and so on seems rather unintuitive but the manual is well written and exhaustive. It’s more of an adventure for sure but the OS is stable and ready to use out of the box.
Ooo never heard of Guix, just did a little research on it. I am looking to switch to a declarative distro as well. I seem to have the same tendency of breaking shit when playing around with different packages and running different projects locally. I have been looking at NixOS, have you heard of it and if so, why did you choose GUIX over it?
To echo everyone else, make sure to use PCpartpicker. It’s actually a fairly simple thing to do, I was surprised by how few problems I had my first time. Watch lots of youtube first, like how do I install the processor into the motherboard, how do I wire everything up. Definitely watch a few assemblies before attempting your own. If you do your homework, it’s like a 2 beer activity honestly. I started about 4pm and was eating supper with the family while Windows updated.
There’s usually no need to buy the top end motherboards, they have a whole lot of bells and whistles you won’t ever miss.
Save everything that comes in your motherboard box. Don’t be the fool (me) who needs to buy m.2 screws on Amazon.
I end up saving everything from every box, haha. I still have all the cords from my modular PSUs sitting in my basement, still in their little bags
Before mounting your motherboard, double-check the number of screws/standoffs you need, then make sure all the standoffs match up with the holes in the motherboard.
I misaligned one once and shorted out a motherboard.
If you can, just pick the parts but don’t build it yourself, ask a friend who knows what he’s doing and watch or pay for it. You really really don’t want to screw it up with these GPU and CPU prices.
I would, but unfortunately I don’t know anyone with experience in this area. But I won’t be doing it by myself, and I’ve done quite a bit of research, so I at least think I won’t mess up to the point of breaking anything
The site from which you buy your components doesn’t propose you to pay for assembly ?
It’s fairly safe to just do it yourself. Simply be aware you don’t have to force anything too much. Pushing the ram into the slots is likely the most force you need. Even if you get something wrong as long as you didn’t apply to much force and break some pins you can just reseat it and try again.
CPU is the one you’re most likely to mess up but that takes virtually no force at all. If you’re using basically any force, stop and turn it because you clearly don’t have it lined up correctly. They should drop in and then lock into place.
If building it is of interest to someone I think anyone can do it. If you don’t know, just stop a check a youtube video but these days it’s fairly easy to do and virtually impossible to plug anything into the wrong spot.
Damn I just messed around and got to $2k in zero time lol stupid bougie taste.
I would absolutely use “PC Part Picker” because as you assemble the various components, that site will tell you if there are incompatibilities. For instance whether a power supply will fit in the case.
And if you don’t have someone to bounce ideas off of, this is a pretty good site that was recommended to me to help narrow your choices.
deleted by creator
I second Logical Increments, it’s great.
I found PCPartPicker really useful when I last built a PC:
It helps you pick compatible parts, and links to sites you can buy them from. I’d still shop around for the best price after building your list(s), but it’s a great place to start.
I’d agree. I’ve built dozens of computers over the years and these days I always use PCPartPicker as the starting point for my builds.
Ah, thank you! I’ve already been using PCPartPicker, but it has been an AMAZING help. I don’t think I could handle the stress of making a parts list without it
But don’t forget your local microcenter! (If it exists, of course.
I didn’t know micro center existed, thank you! I believe I do have one in driving distance as well
