I still have no idea what I’m doing really. Just too determined to give up I guess, and it’s been such fun. Anyway I made a guitar pedal light switch cover. Still a lot of work to do, and every time I look at FreeCAD the wrong way, the model breaks, but it’s been a fun experience nonetheless.

On a side note, anybody have any idea why the face of the model is rough textured, while the foot switch on the lower half is flawless?

  • HewlettHackard@lemmy.caEnglish
    2·
    10 months ago

    It’d be interesting to see what it looked like in the slicer, just in case it’s obvious there.

    And yeah, each new FreeCAD project I do builds on what I’ve learned and it gets easier to get better results.

      • HewlettHackard@lemmy.caEnglish
        1·
        10 months ago

        One other thing that occurred to me is squish. Just like your first layer issues, the plastic on every layer needs something beneath it to squeeze against so it converts from a circular tube to a flat, wide oval. Maybe your slicing didn’t have enough support or infill in the main body as compare to the final top surface? You could try increasing the horizontal shells.

        By the way, I assume you did not turn on ironing, because that could also affect the surfaces differently if one got ironed and the other didn’t for some reason.