• peoplebeproblems
    link
    fedilink
    English
    arrow-up
    25
    ·
    2 months ago

    Ok, so I don’t have a way to measure that, but given the bit of yellow with the glowing red, that temperature should be reaching “GTFO” degrees C.

    I don’t know how you get water to that temperature inside a steel container without the steam going somewhere else, but if I had to guess that probably didn’t last long and someone should probably turn it off

    • Hikermick@lemmy.world
      link
      fedilink
      arrow-up
      20
      ·
      2 months ago

      Most likely there isn’t any water in the boiler and the flames are trying to heat water that isn’t there. In case you’re wondering this is a fire tube boiler and the flames pass thru tubes inside the water vessel. Normally this is prevented by a low water cutoff but it’s possibly clogged with mud. This thing is gonna melt

      • peoplebeproblems
        link
        fedilink
        English
        arrow-up
        4
        ·
        2 months ago

        Ah, so no steam no boom. That’s good

        Or well not as bad as it could be at least

        • Hikermick@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          2 months ago

          What makes them go boom is when the blower doesn’t clear the combustion chamber of gas before igniting. Most boilers in residential use these days are like tea kettles. They’re pretty safe unless the room fills with gas then ignites

    • Pulptastic
      link
      fedilink
      English
      arrow-up
      7
      ·
      2 months ago

      Red means it is at least 1000F. Could be higher but cameras make hot things look hotter than they are.