• cmnybo@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    17
    arrow-down
    29
    ·
    1 year ago

    It looks like a typical, modern laptop. There’s hardly any ports on it, it uses a non removable lipo battery, and charges with a fragile USB C connector.

    I want a big, swapable battery that uses 18650 cells, a robust charging connector, a full set of audio jacks, ethernet, and lots of USB A connectors. USB C connectors don’t belong on a laptop unless they are easily replaceable like on the framework laptops.

    • Falmarri@lemmy.world
      link
      fedilink
      English
      arrow-up
      46
      arrow-down
      5
      ·
      1 year ago

      a robust charging connector

      Wtf? Usb-c charging is the best thing that’s happened to laptops this decade. You’re insane to want to go back to the bad times.

      • cmnybo@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        7
        arrow-down
        21
        ·
        1 year ago

        The USB C connectors are way easier to break than a large barrel jack and they wear out faster too. If the USB C port is soldered to the motherboard, then you are in for a very expensive repair.

        • const_void@lemmy.ml
          link
          fedilink
          arrow-up
          32
          arrow-down
          2
          ·
          1 year ago

          I used to be in the laptop repair biz. The most common failure mode we saw was the barrel connector. Even ones that were detached from the motherboard like the IBM Thinkpads had.

          • ikidd@lemmy.world
            link
            fedilink
            English
            arrow-up
            8
            ·
            1 year ago

            The Apple mag-connectors are pretty awesome. I’ve never owned a macbook, but I still think those are the cat’s ass.

          • 𝔹𝕚𝕫𝕫𝕝𝕖
            link
            fedilink
            English
            arrow-up
            6
            ·
            1 year ago

            Yup, got lucky if it was on a daughterboard but I’ve had dudes donate their broken machines when they got the solder quote.

          • tal@kbin.social
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            Honestly, I think that that has less to do with the connector itself and more because the power cord gets yanked.

            I’d assume that you could get a similar effect with any connector, USB included. Well, Apple’s MagSafe ones maybe not, as that’ll just pull the cord away.

        • tal@kbin.social
          link
          fedilink
          arrow-up
          7
          ·
          edit-2
          1 year ago

          and they wear out faster too

          The part that wears out is the thing that maintains tension, and that is on the (cheaper, replaceable) cable for USB.

          My understanding that this issue was part of why the move away from mini-USB to micro-USB and later USB-C happened. Mini-USB had the tensioning gizmo on the device, rather than on the cable.

          googles

          Yeah.

          https://electronics.stackexchange.com/questions/18552/why-was-mini-usb-deprecated-in-favor-of-micro-usb

          Why Micro types offer better durability?

          Accomplished by moving leaf-spring from the PCB receptacle to plug, the most-stressed part is now on the cable side of the connection. Inexpensive cable bears most wear instead of the µUSB device.

        • BaconIsAVeg@lemmy.ml
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          2
          ·
          1 year ago

          Maybe don’t treat expensive hardware like it was made by Fisher Price? Why should consumer electronic manufacters cater to the careless at the cost of conveinence?

    • azvasKvklenko@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      I’ve been using my Thinkpad that only charges over usb-c for 5 years now and the port is still like it was new. Can’t see why this is an issuse, especially that I used to have issues with some barrel port chargers and needed to replace them. On a contrary I now have charger with a plugin so simple that it’s unlikely it will break anytime soon and finding replacement charger is super easy as it is FINALLY a single standard port. I actually have 2 such chargers because of SteamDeck and they both work with both devices. Even if the connector in my laptop broke, there’s second one that I only used few times + replacing it would be easier as it’s not a big deal to find fairly standard connector to be resoldered, and with older laptop chargers there are many different variants of proprietary connectors.

      • tal@kbin.social
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I have a Thinkpad that has both the USB C and the traditional Thinkpad charging port.

        I normally just use the USB C port, but I do like having both available.

        Even if the connector in my laptop broke, there’s second one that I only used few times

        Unless your Thinkpad and mine differ – and maybe they do, given that mine has both the traditional and USB C charging ports, so a total of two – only one of the USB C ports can charge the laptop. On mine, both USB C ports can do USB PD, but one is in/out and the other is out only.

    • tal@kbin.social
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I want a big, swapable battery that uses 18650 cells,

      I mean, me too. I think that having less than a 100 Wh battery is nuts, but it’s essentially impossible to find them.

      I think that a couple of things have killed this:

      • Cost. Cutting battery size is an easy way to cut cost, and it’s less-explicit than, say, cutting RAM, as vendors often list a non-standardized “hours of battery life”.

      • USB PD plus external power stations. I think the expectation is that one will get one and having the user just use external ports makes life easier for the vendor and means that they don’t need to deal with counterfeit batteries and such. Also moves heat out of the laptop. I would be more sympathetic to this if there were a standard for a laptop to start automatically drawing from an external USB powerstation when its internal battery gets low, rather than requiring manually-triggering charging.

      • Weight. Apparently some people are super-rabid about laptop weight.

    • conciselyverbose@kbin.social
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      1 year ago

      Are you willing to pay several thousand for a mediocre CPU and no dedicated graphics?

      Because even then they don’t have a chance of making their R&D back.