Do you like a tactile click? Are you a sucker for screws? Or something you can put in any direction? Maybe it’s yours or another country’s power plugs?

This is sounding more sexual than I intended I think

  • WormFood@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I love XLR and mini-XLR. Durable connector, nice locking mechanism, satisfying click. Also very easy to wire yourself.

  • AlternateRoute@lemmy.ca
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    1 year ago

    Most RJ-45 connectors (without a boot on them)… The connector only fits one way, the orientation is clear on both ends while holding, looking or even by feel if you have to do it blind and it locks into place easily. Only issue is how fragile the locking part is, which boots are supposed to help protect but make more difficult to use.

    I like reversible connectors like lighting and USB-C but I find them too small and fragile in general and they are not very satisfying to connect.

    I have a special hate for connectors that are HARD to blind connect or even tell at a distance like USB-A, HDMI and Displayport which are ether rectangles or slightly not rectangles that are close enough that is hard to tell in the dark behind a device.

    I have a strong dislike for connectors with thumb screws, but like locking connectors like Centronics or as noted RJ11 or RJ45.

    • Alperto@lemmy.ml
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I agree! And it’s reversible, and it’s specially satisfying by holding it from the cable and just approaching it to the macbook and feel (it happens too fast to see it) how it moves and snaps into place no matter what. It’s the only one ever I always have had a 100% success rate ever.

  • Hobovision@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I’m a sucker for any connector that has a nice solid spring load mechanism that pops into place when properly connected. It should sound like a movie sound effect of a gun being reloaded.

    I’ve also used some really nice quick release steering wheels, like on race cars or racing sims, where they have a spline connector with a tight fit and a good spring load.

    • nickajeglin@lemmy.one
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      You ever used a Deutsch Weatherpak connector? We use them on mobile equipment. They have a spring loaded face seal then a solid lever lock that is plastic but substantial enough that it’s usable. They’re pretty good wire to wire connectors. I’ll take anything with a twist lock though, BNC etc.

  • edent@lemmy.one
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Magnets. (How do they work?)

    I replaced all my USB-C and Micro-USB connectors with magnetic ones. No more orientation worries, no more fumbling in the dark, no more not-inserting-it-hard-enough. Just bring the two into proximity and them magically snap together.

    Bliss.

  • kenblu24@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    edit-2
    1 year ago
    • Best insertion: Displayport Locking
      • Runner-up: Ethernet (RJ45), Apple 30-Pin (Locking)
    • Best removal: Magsafe 3
      • Runner-ups: USB-C, USB-B 3.0
    • Best differential pair connector: Lightning (because it’s so consistent feeling)
      • Runner-up: USB-C
    • Best residential AC plug: British BS1363 (Type G)
    • Best lightbulb base: Bayonet B15s
      • Runner-ups: GU10, GU24, Fluorescent Bi-pin
    • Best audio port: 6.35mm TRRS (1/4")
      • Runner-ups: Banana Jacks, Neutrik SpeakON
    • Best video port: HDMI
      • Runner-ups: RCA Composite/Component, DVI, BNC, USB-C
    • Best device-internal connector: JST GH series
      • Runner-up: any miniature mezzanine connector

    • Worst differential connectors: USB micro B 3.0, any ethernet cable with a bubble boot or broken latch, mini-HDMI, micro-HDMI
    • Worst HF connectors: Coaxial, all miniature HF wire to board connectors (holy crap the naming is inconsistent) i.e. UFL, IPEX
    • Worst audio connectors: cheap 3.5mm, spring clip terminal, binding posts (especially plastic knob ones)
    • Worst residential AC plug: Europlug
    • worst device-internal connectors: wire soldered through-hole, any Molex connector or power connector inside a computer
    • lotanis@discuss.tchncs.de
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Solid ranking, but on audio you’re neglecting XLR. Quarter inch jacks are indeed very satisfying, but XLR is so reassuring.

    • hydro033@kbin.social
      link
      fedilink
      arrow-up
      0
      arrow-down
      1
      ·
      1 year ago

      Even after silicone lubing all my molex they still suck ass. Hate those things so much

  • markr@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    1 year ago

    Standard usb connector because despite my having a 50% chance of having it right side up, the first attempt is always upside down.

  • Lodespawn@kbin.social
    link
    fedilink
    arrow-up
    0
    arrow-down
    1
    ·
    1 year ago

    Ergh english AC plugs are garbage, built in 13A fuse? Fix your damn power network, Australian plugs are easily better.

  • Nobsi@feddit.de
    link
    fedilink
    arrow-up
    0
    arrow-down
    1
    ·
    1 year ago

    My first is RJ45, it’s so clicky.
    After that is everything held together by magnets. I bought a cheap magnet microusb cable for charging my headphones. It’s like magsafe but way weaker.